top of page
PLUSFIL B®
PA 6
This line of polyamide 6s, both filled and non-filled with glass fiber, distinguishes itself to meet the needs of various application sectors. The main characteristics of PLUSFIL B, reinforced with various fillers, are very high stiffness, high mechanical strength, high hardness and toughness, high creep resistance, improved dimensional stability, good fatigue resistance, and high mechanical damping properties. Available in numerous colors.
Plusfil B241
PA6, non-reinforced, injection molding, low viscosity
Plusfil B271
PA6, non-reinforced, injection molding
Plusfil B351
PA6, non-reinforced, extrusion, high viscosity
Plusfil BTL271
PA6, non-reinforced, injection molding, improved impact strength
Plusfil BT271
PA6, non-reinforced, injection molding, very high impact strength
Plusfil BTR051G
PA6 5% glass fibers + elastomer, injection molding, improved impact strength
Plusfil BR101G
PA6 10% glass fibres, injection moulding
Plusfil BR151G
PA6 15% glass fibres, injection moulding
Plusfil BFR151G
PA6 15% glass fibers, injection molding, improved surface finish
Plusfil BTR151G
PA6 15% glass fibers + elastomer, injection molding, improved impact strength
Plusfil BR201G
PA6 20% glass fibres, injection moulding
Plusfil BTR201G
PA6 20% glass fibers + elastomer, injection molding, improved impact strength
Plusfil BR301G
PA6 30% glass fibres, injection moulding
Plusfil BFR301G
PA6 30% glass fibers, injection molding, improved surface finish
Plusfil BTR301G
PA6 30% glass fibers + elastomer, injection molding, improved impact strength
Plusfil BR304GHR
PA6 30% glass fibers, high release, lower coefficient of friction
Improved surface finish, improved surface lubricity and slip
Plusfil BFR401G
PA6 40% glass fibers, injection molding, improved surface finish
Plusfil BFR501G
PA6 50% glass fibers, injection molding, improved surface finish
Plusfil BC151GB
PA6, 15% glass spheres, injection molding, low tendency to warp
Plusfil BC301BG
PA6, 30% glass spheres, injection molding, low tendency to warp
Plusfil BRC301GX
PA6, 30% glass fibers/glass spheres, injection molding, low tendency to warp
Plusfil BR301GM
PA6, 30% glass spheres/ mineral filler, injection moulding, low tendency to warp
Plusfil B279hD
PA6 reinforced Nanotubes, Conductive Electric, heat stabilized, lower coefficient of friction Improved surface finish, improved surface lubricity and slip, better abrasion resistance
Product
Characteristic
Documentation
bottom of page